The Mr Venty ECO2 Wall is an energy efficient condensation-control unit for flats and apartments. It introduces fresh, filtered air throughout the property to transform a stagnant and stale atmosphere into a fresh, healthy and condensation-free environment.
Minimum Energy Consumption
Powered by an Ultra Low Watt Brushless Motor, the Mr Venty ECO2 Wall utilises the latest technology to ensure minimum energy consumption and long term trouble free life.
Warm air accumulates at ceiling level. This air can be up to 7°C higher than the internal air at ground level. By introducing an almost imperceptible air supply into the dwelling, the Mr Venty ECO2 Wall helps to redistribute heat around the home and thus reduce space heating costs.
With improved building features in our homes, such as cavity wall insulation, double glazing and draught proofing, 'natural ventilation' is prohibited. Stale air is trapped causing streaming windows, which ultimately leads to musty smells, dampness and mould growth. These mould spores are known allergens and become airborne at the slightest disturbance. The microscopic spores are then inhaled and can trigger respiratory problems such as asthma, dust allergies and hayfever.
The Mr Venty ECO2 Wall draws fresh air into the dwelling from outside and filters it before being delivered into the property. Moisture laden air is diluted, displaced and replaced with clean, tempered and filtered air. This eliminates or reduces surface condensation, which causes mould growth, providing a significant improvement in the health of asthma sufferers and general indoor air quality.
With 5 year on-going maintenance free warranties and superior long life filters the unit achieves the lowest life-cycle costing. All other component replacement is carried out simply and quickly by exchanging the consumable items. The worn out components are then taken back to the factory to be recycled thus reducing the impact on landfill and saving millions of pounds in replacement costs.
Pre-Heater and Hours Run Meter
The integral pre-heater is designed to temper the incoming air during periods of low external temperatures. A sensor monitors incoming air and pulses the heater to ensure temperatures are held to pre-set minimums.
Two independent safety cut-out devices shut down the heater in the event of fan failure. The heater facility is controlled independently from the fan by a conveniently positioned enable/disable switch. For monitoring of operational life and verification of usage, an integral Hours Run Meter is fitted.
Click here to request a hard copy or digital version of our catalogueFind out more