For expert advice or quotations call
0845 27 27 810

• Condensation
• Asthma & Allergies
• Mould
• VOC's
• Benefits of
  Input Ventilation
• Benefits of
  Heat Recovery

• What is the
  Lifetime Range®?
• Lifetime Range® products
  • Filterless Extract Fan
  • Input Ventilation
    • Loft Mounted
    • Wall Mounted
    • Loft Mounted Air Source
  • Spider MEV
  • energiVent Q
  • energiVent FLOW
  • energiVent Impact

• Accreditations
• Check out our Blog
• See our facebook page
• CPD's
• Video library
• Case study library

• Lifetime Range®
• Bathroom Fans
• Quiet Running Fans
• Kitchen Fans
• Whole House
• Apartment/Flat
• Heat Recovery
• SELV Fans

Downloads

Download brochure

For further information on this product call

0845 27 27 810

Exceptional Energy Efficiency

The 12 inch heat recovery unit is ideal for smaller commercial premises such as schools, pubs, libraries, doctor’s surgeries and gyms. Incorporating Ultra Low Watt DC Motor Technology with a two-speed operation and wireless manual boost switch, the unit provides continuous extract ventilation. This extracted air passes through the robust aluminium heat exchange cell before reaching atmosphere. Simultaneously, fresh air is drawn into the unit from the outside and is filtered before being warmed by the heat exchanger and delivered back into the room.

Ease of Installation

Designed for speed of installation, the E-Series is highly versatile and provides utmost practicality. Supplied with the innovative wall sleeve extension kit, the unit can be installed into wall thickness up to 600mm to provide a secure, clean and completely air-tight application. Alternatively, for simple replacement installations, the E-Series can utilize an existing wall sleeve. Featuring simple electric fittings and wireless technology, no further requirement for additional wiring is necessary. The whole installation process should take no longer then one hour to complete.

Ease of maintenance and incredible low life-cycle costs

The energiVent Impact has also been designed for simple and rapid maintenance, achievable from inside the building. The four powerful axial fans will run continuously for a minimum of five years, after which the fan compartment can be easily accessed to enable rapid replacement. The exchanged fans are then returned to the factory to be reconditioned.

The unit is fitted with a heat exchange cell for life. The cell can be simply and safely removed to be cleaned in a commercial dishwasher or by hand in a sink.

Quiet Operation

The energiVent Impact has a significant acoustic benefit. As the noise passes through the unit, the heat recovery cell modulates the frequency level which results in a significant sound reduction.

Control Options

The standard unit is fitted with a hard wired switch, which provides trickle and boost facility with a trickle commissioned at installation.
The following options are also available:

• Manual override switching
• Wireless control switches
• Humidity sensing automatic switching
• CO2 sensing automatic boost switching
• PIR sensing automatic boost switching
• BMS integration