Search Results

Arrange a Survey

What type of customer are you?


For Homeowners, Private Landlords & Letting Agents


For Specifiers, Trade & Social Landlords


Top Tips to Improve the Air Quality in Your Home

Select a category

Top Tips to Improve the Air Quality in Your Home

By EnviroVent Oct 04, 2017

Poor indoor air quality is a growing problem in UK homes, where a recent survey revealed that 20% of householders reported that they experienced condensation and mould growth in the home.

Not only is mould unsightly and damaging to the fabric of a building, it has also been found to aggravate breathing and skin conditions, such as asthma and eczema.

Here are ten tips that can help improve indoor air quality and eradicate condensation and mould growth in the home:

1. Dry with care

Householders should try to avoid drying washing indoors, especially on the radiators as this can cause humidity levels to rise which is when condensation starts to form. If there is no other alternative and laundry has to be dried inside, it should be done so in a well ventilated room, like the bathroom, with the door closed.

2. Create some space

Mould loves tight spots, so it’s best to leave around two inches of space between the furniture and walls to enable the air to circulate around the property. Try to ensure that the wardrobes are placed against internal walls in the bedroom, which will be warmer than external walls and less likely to cause damp and mould problems.

3. Consider a whole house ventilation system

The average four person family creates 112 pints of moisture every week, from just breathing, cooking, showering and boiling the kettle. To help remove excessive moisture and reduce humidity levels, we recommend a whole house ventilation system, like Positive Input Ventilation (PIV).

A PIV system works by drawing in fresh, filtered, clean air from outside the building and gently ventilating the home from a central position. These units dilute moisture laden air, displacing it and replacing it to control humidity levels between 45% and 60%, reducing the moisture and in turn removing condensation problems. The health benefits and improvements to the air quality could be immediate.

4. Check the dryer

If the home has a tumble dryer with a ventilation pipe, it is important to check that it runs to the outside of the property, alternatively if it is a condensing model, it must be emptied of water after each use.

This also applies to dehumidifiers, as leaving the water tank full completely defeats the object of having one. However, if a householder does keep a dehumidifier running throughout the day, it should be emptied as soon as possible to reduce the build-up of moisture in the air.

5. Reduce the use of chemical based products

Volatile organic compounds (VOCs) are found in many everyday household products, including cleaning products, deodorant sprays and even scented candles. One of the most common VOCs comes from limonene, an ingredient that is used to give candles and cleaning products their scent. In its unaltered state limonene is considered safe, however when it comes into contact with the air one in every two molecules mutate into formaldehyde, which can cause tiredness, headaches, allergic reactions, respiratory problems and other illnesses.

Householders can prevent this by reducing the use of scented candles and similar items, such as wax melts or oil burners and sourcing cleaning fluids which are environmentally-friendly. These will work in exactly the same way as regular cleaning products, but without causing damage to a person’s health. An effective continuous ventilation system will reduce VOC levels, with many positive health benefits.


6. Hoover regularly

If the bathroom or kitchen has carpets, which can regularly become wet due to bathing and washing, it’s worth considering opting for a tiled or laminated floor instead. This will eliminate nasties such as dust mites, mould and fungi. If this isn’t an option or personal preference is to stick with carpet, then it’s important to make sure it is cleaned regularly, and the space is well ventilated to keep humidity levels to a minimum.

7. Check fans are working properly

A good extractor fan is a key weapon in the fight against mould. Most of the moisture in a house is created in the kitchen and bathroom, so these are the most important areas where extract ventilation needs to be fitted. However, these units can sometimes become blocked or stop working completely, so it is important to check them regularly to ensure they are running correctly.

8. Keep it constant

Condensation can occur when heat levels drop, especially during winter. Keeping the temperature level in the home at a constant will help to avoid this.

9. Ditch the moisture makers

Paraffin and gas heaters produce a lot of moisture and toxic fumes, especially when used in smaller rooms. Not only does this form of heat cause excess condensation in your property, but it can also prove to be a health and safety hazard, so it is best to avoid using these appliances.

10. Have your air quality tested

If a householder is experiencing condensation or mould issues, then it’s a good idea to have a ventilation survey. An experienced ventilation company, such as EnviroVent, can help by providing a no obligation, free home survey and advice on the best approach to improve the air quality within your home.

With ‘Toxic Home Syndrome’, when the air inside the home is significantly more polluted than that outdoors, now recognised as a serious issue, it is important to ensure that good ventilation is in place. Issues with condensation and mould can easily be eradicated for the long term, without the use of mould sprays or the need for regular redecoration.