ATMOS For Flats & Apartments | Whole House Ventilation System

ATMOS For Flats & Apartments

Energy Efficient Condensation-Control Unit for Flats & Apartments

ATMOS For Flats & Apartments

ATMOS For Flats & Apartments is an energy efficient condensation control unit designed specifically for flats and apartments. It introduces fresh, filtered air throughout the property to transform a stagnant and stale atmosphere into a fresh, healthy and condensation-free environment.

Features & Benefits

  • Reduces/eliminates surface condensation
  • Quiet operation
  • Eliminates mould
  • Stops streaming windows
  • Removes musty odours
  • Improves air quality
  • Can reduce heating costs
  • Benefits asthma sufferers
  • BBA approved
  • Expert fitting staff
  • Low running costs
  • Integral intelligent comfort heater (as standard)
  • 5 Year Warranty

Minimum Energy Consumption

Powered by an Ultra Low Watt Brushless Motor, ATMOS for Flats & Apartments utilises the latest technology to ensure minimum energy consumption and long-term and trouble-free life.

Heat Distribution

Warm air accumulates at ceiling level. This air can be up to 7°C higher than the internal air at ground level. By introducing an almost imperceptible air supply into the dwelling, the ATMOS unit helps to redistribute heat around the home and thus reduce space heating costs.

Health benefits logo

With improved building features in our homes, such as cavity wall insulation, double glazing and draught proofing, 'natural ventilation' is prohibited. Stale air is trapped causing streaming windows, which ultimately leads to musty smells, dampness and mould growth. These mould spores are known allergens and become airborne at the slightest disturbance. The microscopic spores are then inhaled and can trigger respiratory problems such as asthma, dust allergies and hayfever.

Mr Venty - Asthma

ATMOS for Flats & Apartments draws fresh air into the dwelling from outside and filters it before being delivered into the property. Moisture-laden air is diluted, displaced and replaced with clean, tempered and filtered air. This eliminates or reduces surface condensation, which causes mould growth, providing a significant improvement in the health of asthma sufferers and general indoor air quality.

Environmentally Friendly

With 5-year on-going maintenance free warranties and superior long life filters, the unit achieves the lowest life-cycle costing. All other component replacement is carried out simply and quickly by exchanging the consumable items. The worn out components are then taken back to the factory to be recycled thus reducing the impact on landfill and saving millions of pounds in replacement costs.

Pre-Heater and Hours Run Meter

The integral pre-heater is designed to temper the incoming air during periods of low external temperatures. A sensor monitors incoming air and pulses the heater to ensure temperatures are held to pre-set minimums.

Two independent safety cut-out devices shut down the heater in the event of fan failure. The heater facility is controlled independently from the fan by a conveniently positioned enable/disable switch. For monitoring of operational life and verification of usage, an integral Hours Run Meter is fitted.

Mr Venty Eco2 Wall Visual

See the Annual Running Costs & Performance

ATMOS For Flats & Apartments E-WALL

Mr Venty Eco2 Wall dimensions

Mr Venty Eco2 Wall performance

Arrange a Survey

  • Free Expert Advice
  • Relative Humidity Check
  • Product Demonstration

Yes, I would like to receive updates about products and services, promotions, special offers, news and events via: