The energiSava 380 is a centralised heat recovery fan unit mounted in your loft space that continuously removes stale, moist air from your bathroom, kitchen, WC and replaces it with clean fresh tempered air through circular valves mounted in your ceiling and in your living room areas.
Delivering not only the utmost practicality in installation flexibility, the system also performs to the highest efficiency on SAP Appendix Q and achieves a low Specific Fan Power of 0.40 W/l/s. Recovering up to 93% of the heat, the energiSava 380 reduces carbon emissions whilst providing continuous, all year round good indoor air quality.
The energiSava 380 is available with the myenvirovent app, developed to allow the resident to adjust ventilation settings and boost the ventilation system from their smartphone or tablet. The app has been designed to benefit both the resident and ventilation engineer.
The energiSava 380 has been designed specifically for ease of installation in a unique modular format to fit through a standard loft hatch and provide optimum flexibility.
The system incorporates two modules: The dual functioning twin fan extraction and input module; and the ultra efficient heat exchange module. The lightweight and compact format allow for a one-man installation and the system is designed for easy push-button commissioning. It can also be rotated to enable both right and left configurations depending on the type of installation required.
Suitable for properties with kitchen plus 7 wet rooms, the energiSava 380 is not only exceptionally powerful, delivering a maximum airflow of 120 l/s but is also highly efficient achieving a thermal efficiency of 93% and Specific Fan Power as low as 0.40 W/l/s.
As part of the Lifetime Range®, the system comes complete with a 5-year warranty. It incorporates plug in/plug out G4 pollen filters for ease of maintenance. Other internal components can be serviced easily such as the fan section and electronics.
The energiSava 380 runs continuously on trickle, providing all year round healthy indoor air quality. No user intervention is required as the intelligent humidity tracking controls constantly monitors the average humidity level over a two minute period. This allows the system to
sense any rise in humidity and increase the extract rate in direct correlation to quietly and efficiently control condensation. Even at night time it has been cleverly engineered to prevent noisy running.
For manual boost operation, a hard-wired boost switch comes as standard with the system. Alternatively, an optional remote controlled boost switch is available. The system also incorporates a frost protection facility which monitors the temperature of the heat exchange cell. When the temperature drops below 5°C the system will automatically revert to extract-only mode, which blows warmer air through the cell, preventing the formation of frost and ensuring optimum efficiency of the system.
The energiSava 380 can be installed with PIR for presence detection and absence mode as optional extras.
|ESAVA380||energiSava 380 Standard|
|ESAVA380||energiSava 380 (app enabled)|
|ESAVA380W||energiSava 380 with remote controlled boost switch|
|ESAVA380SB||energiSava 380 summer by-pass kit (accessory)|