The heatSava is an energy efficient, through-the-wall mini ventilation unit called a Single Room Heat Recovery unit (SRHR). It has been designed for people who are looking for new and innovative ways to save energy. Recovering up to 75% of heat from the air that would normally be lost through extraction, the heatSava reduces carbon emissions, whilst providing continuous all year round ventilation. It is available in 100mm and 150mm for mounting through external walls in WCs, kitchens, bathrooms and utility rooms, to either replace existing extract fans or for new installations.
How does the heatSava work?
The heatSava extracts air from the kitchen or bathroom, which passes over a high efficiency tubular heat exchange cell. The unique design of the cell enables the air to cyclone around the barrel, just like a corkscrew. As it does so, the heat from the extracted air is retained in the cell before it reaches atmosphere.
At the same time, fresh air from outside is supplied through the tubes, collecting up to 75% of the heat from the extracted air before returning it into the room, providing savings on energy costs. The heatSava runs continuously 24 hours a day on a low background trickle rate to provide constant all year round good indoor air quality, controlling humidity levels and reducing condensation.
Innovative Condensate Facility
The bi-product of any high efficiency heat exchange cell is condensation. This presents a challenge to design engineers to ensure that any condensate which forms inside the cell is directed outside the property and not inside the product, where it could mix with electronic components or damage decorations inside the room. The unique design of the heatSava allows the heat exchange cell to be completely sealed within the cell casing, providing a totally air tight compartment.
Should any condensate form, it would be held within the barrel and drain out directly to atmosphere through the holes located in the cowl at the rear of the unit. The unique configuration of the air movement through the cell means that no condensate can form within the tubes resulting in all year round quiet, high efficient performance.
The heatSava is available in two cell diameters: 100mm for bathrooms and WCs and the 150mm for kitchens, ideal for both refurbishment and new build installations. Fitting neatly into almost any wall depth, the length of the cell is available to suit external wall depths of 310mm, 430mm, 500mm and 600mm.
The direct replacement of an existing traditional extract fan can be simply and quickly achieved, whilst the innovative design also allows the unit to be installed flush to uneven walls. It is also high-rise friendly, easily installed from inside the building, without the need for scaffolding.
It can be installed in four different positions through 360°, horizontally or vertically to fit into tight spaces or where an existing hole is located just below the ceiling. With its stylish symmetrical design it looks attractive in any position. The heatSava is IPX4 rated and can be installed in Zone 1 with RCD protection. A low voltage version is also available for extra safety.
Intelligent Humidity Tracking Controls - The heatSava has been engineered with intelligent controls to think for itself, meaning that you don't need to press any buttons or light switches to turn it on.
When the heatSava senses a rise in humidity, caused by increased moisture generation such as through cooking or showering, the extract and supply airflows will slowly begin to increase in direct proportion to the increase in humidity. It will then automatically track back down again when humidity falls. This controls condensation quietly and efficiently.
Pullcord - The heatSava comes complete with a pullcord to activate the boost for odour control if required. Pull once to activate the boost and once to deactivate.
Summer Mode - During warmer days, the heatSava prevents warm air from entering the room and switches to provide extract ventilation only. As the temperature falls it automatically returns to heat recovery mode.
Frost protection - The heatSava has an automatic built-in frost protection mechanism to prevent any damage to the heat exchange cell in cold conditions.
Hassle-free cleaning and maintenance
The heatSava can be easily cleaned and serviced completely hassle-free by the resident to maintain efficiency and performance. When the front cover is removed the unit will stop operating to allow the unique plug out/plug in heat exchange cartridge to be removed using the service key provided. The cell can then be simply vacuumed or wiped clean with a cloth.
|HS100/330W||heatSava 330mm, wireless version|
|HS100/430W||heatSava 430mm, wireless version|
|HS100/500W||heatSava 500mm, wireless version|
|HS100/600W||heatSava 600mm cell, wireless version|
|HS150/330W||heatSava 330mm, wireless version|
|HS150/430W||heatSava 430mm cell, wireless version|
|HS150/500W||heatSava 500mm cell, wireless version|
|HS150/600W||heatSava 600mm cell, wireless version|
Click here to request a hard copy or digital version of our catalogueFind out more