Centrifugal WC & Bathroom Extractor Fan
The EBB Design extractor fan is suitable for WC, bathroom and kitchen applications where higher system resistance pressures are encountered. The fan incorporates a forward curved centrifugal impeller with single phase motor 230V-50Hz and Class || insulation.Maximum operating temperature 40 °C.
This product is covered under the Green Homes Compliance Scheme.
Compliant as follows:
EBB Design 175, for WC & Bathroom ventilation
EBB Design 250, for WC, Bathroom, Utility ventilation. Also compliant for kitchens with through the wall installation.
Find out more information on the Green Homes Compliance Scheme and Ventilation Compliance here >
High quality products for peace of mind, saving time, money and hassle.
This product is covered under the Green Homes Compliance Scheme under the Green Homes Grant Scheme. The Green Homes Grant Scheme is designed for homeowners and landlords to introduce energy saving measures into their homes such as wall, under floor, cavity wall or roof insulation, heat pumps or solar thermal. For more information please click here >
EB Design is fitted with an automatic back draught shutter to prevent air entry and limit heat leakage when the extractor is not operating.
To deliver high performance with a minimum noise level against high static pressure system resistance.
Centrifugal fans extract air at right angles to the intake of the fan, and spin the air outwards to the outlet by deflection and centrifugal force. The impeller rotates, causing air to enter the fan near the shaft and move perpendicularly from the shaft to the opening in the fan casing.
This allows the fan to produce more pressure for a given air volume, and is thus able to 'push' the extracted air along much longer duct runs.
Centrifugal fans are often seen in rooms which do not have exterior walls. Such rooms do not have windows or any natural ventilation and these circumstances usually require a long duct run to reach the outside of the building.
Internal humidity sensor which automatically switches on the unit when the relative humidity rises above the selected set level; pullcord or remote switch.
The 'run-on' time is adjustable and can be set between 5-30 minutes.
The EBB 175 Design comes in both 1 and 2 speed versions. The 250 has a 3 speed motor.
Supplied with pullcord override.
Complete the quick quote form and one of our ventilation experts will contact you to discuss your requirements.
Want to find out more about our products and service? Request a free brochure and we'll send one out in the post to you.
Find your nearest electrical wholesaler and pick up your EnviroVent product locally.
© EnviroVent Ltd 2021. All right reserved. Part of S&P Group.