heatSava®

The heatSava® is an MVHR unit, suitable for a single wet room such as a bathroom, kitchen or utility room.

These are installed through the wall and have the added advantage of not requiring a ducting layout.

The heatSava® has a tubular heat exchange cell which enables the air to move around the cell in a corkscrew action, extracting the stale moist air to the atmosphere whilst simultaneously supplying air through the tubular cell and into the room.

The heatSava® has a mechanical summer bypass as standard, ensuring that during periods of warm weather, the airflow is able to bypass the heat cell, keeping the property comfortable.

This activates when the incoming temperature is ≥25°C and will reactivate when the temperature reduces below this point, with automatic checks in place every 15 minutes.

The heatSava® comes as standard with frost protection via airflow imbalance.

The supply fan will shut off to protect the heat cell from damage when the temperature is ≤-2°C, and will re-activate when the temperature has increased above this point. Once activated, the frost protection will remain for one hour.

The heatSava® is offered in both 100mm and 150mm spigot sizes.

There are also four wall sizes available, 330mm, 430mm, 500mm and 600mm for a variety of wall thicknesses.

The heatSava® range is up to 75% energy efficient.

The heatSava® range comes with a five year warranty as standard.

The heatSava® range comes as standard with a pullcord, time elapsed meter to monitor the unit lifespan, as well as Intellitrac humidity tracking, which enables the unit to alter in speed based upon the humidity level in the room.

If required, there are wireless control options available that can alter the speed between trickle and boost, manually control the summer bypass mode, and the frost protection.